Features:
• Fully automatic.
• Washes flat, round, and V-bottom plates and strips.
• No user adjustments required. Automatic calibration, alignment, and last row detection.
• 6 ready-to-run wash programs.
• Large, non-volatile memory stores at least 50 user-specified wash protocols.
• Precision operation with constant monitoring of vacuum and pressure. Pump cycles only when necessary for quiet operation.
• Programmable automatic rinse cycle.
• Ready to run: bottles, aerosol shield, 8-way manifold included.
• 12 and 16 position wash heads available.
• NRTL and CE certified.
SPECIFICATIONS:
Residual Volume: <3µl
Dispense Accuracy: <3% CV at 300µl
Processing Time (full Plate):55 seconds aspirate/dispense with single or double aspirate
Liquid Contact Materials: Stainless steel, Delrin, silicone, nylon, PVC, polypropylene, HDPE
Display: Two-line LCD, alphanumeric, 24 characters per line
Keyboard: 16-key, domed membrane switch, 4 x 4, enunciating
Power Requirements: 115V or 230V AC, 50-60Hz (switch selectable)
Microprocessor: Z80A or Z180
Non-volatile Memory: Battery supported RAM, holds approx.. 50 wash protocols
Washing Programs: Aspirate, dispense, mix, soak – up to 99 minutes 99 secs.
Special Menu Options: Auto alignment – senses physical geometry of the head, plate, and carrier mechanism
Standby – disables pumps and releases vacuum and pressure
Self-Check- performs internal performances tests and auto alignment
Auxiliary-selection of well type, select auto/manual well depth and dispense depth, constant plate cycle time, viewing of pre-programmed tests, configure auto-rinse, set the time and date.
Bottles: Wash and waste 2L, rinse 1L, plastic with volume sensor probes.
There are no reviews yet.